QL50 QL 50 5" 5inch 5 inch DTH down the hole hammer
advantages:
1. Non-Blocking:Our S-series DTH hammers are proved to ensure extremely low rate of blocking during it works.
2. High Efficiency:The well drilling equipment carries with larger power of impact frequency and torque, thus ensuring faster penetration. Compared with others, the efficiency can be improved 10%.
3. Longer Service Life:All surfaces of the DTH hammer and bits are treated by anti-friction and intensified technology. When used in deep-hole drilling works, it can reach at 5000 meters or more.
4. Excellent Cleaning Effect: This DTH tool has large air output, which specially designed for water well users and enables it to flush out cuttings in deep hole drilling works.
Scope of application:
Mining, quarry, road building, well hole drilling, blasting, landslide prevention, dam reinforement, anchoring, geothermal, hydrology, etc
Different size and shank types of DTH Bit
1 .Low air pressure hole Dia.:65-220mm
2.High air pressure hole Dia.:85-305mm
3.Face type:drop center/concave/convex/double gauge/flat
4. Our DTH Bit can be suitable for many types of DTH Hammer shank, including Mission, COP, IR, Mach, Demag, SD, Bulroc, Halco Mach, Digger etc.
|
Carbide Selection
Carbide Designs
Perhaps the most fundamental decision when selecting different carbide
configurations is profile shape. Button bits most commonly have either a hemispherical
or semi-ballistic carbide design; however it is not uncommon to use other carbide designs as well.
Faster
Shorter lifetime and susceptible to breaks : Conical Full Ballistic
Penetration rate:
Tungsten carbide life time. Semi Ballistic
Slower
Longer lifetime and less susceptible to breaks: Crown Point and Hemispherical