Español
Русский
Our hammer and bits are made of high quality alloy steel with advanced heat treatment to assure the good drilling performance and long service life,all the products are manufactured as per the international standard. They are widely used by our customers all over the world.
1. With the piston resting on the percussion bit and the hammer closed up in the drilling position, high pressure air is directed into the bottom chamber of the Hammer and the piston lifts. This commences the piston cycle.
2. As the piston travels upwards it forms the top chamber by forming a seal with the inner tube and the ID the piston. Further movement seals the port that feeds the bottom chamber and also simultaneously releases the seal on the bottom chamber allowing the air to expand and exhaust down the splines of the percussion bit. At the same time the Top chamber port is opened which feeds the high pressure air into the previously formed top chamber thus increasing the pressure above the piston and forcing it back down.
3.During the down cycle or power stroke the piston reseals the bottom chamber on the piston bearing bush thus stopping the exhaust air and creating a chamber of high pressure air below the piston which forces the piston back up the hammer.
4. Lifting the hammer of the bottom of the hole allows the percussion bit to slide down the drive sub also allowing the piston to slide down the hammer and rest on the piston bearing bush. The piston strike face and the strike face of the percussion bit can now not come into contact thus allowing the free flow of high pressure air directly through the hammer without the hammer cycling.
1. Fast drilling speed and low air consumption due to the special inner structure.
2. Smooth performance and long service due to high quality alloy steel materials and advanced processing technology adapted.
3. Low problem rate and easy to maintenance due to simple, reliable and easy assemble and disassemble inner structure of hammer.
4. Easy to depart bit from hammer due to multi-head thread connecting chuck and cylinder of hammer.
5. Interchangeable with DTH bit and drill pipe
By sea, By air or By Express
Ply-wooden cases
Ply-wooden cases + pallet
.
