Product Specification
HJG tricone bit used for geoloical prospecting,development of oil and gas,drilling water wells, blast holes and making holes for seismic prospecting, construction engineering, now there are eleven common types of tricone rock bits.
Steel teeth series: IADC CODE:116,117,126,127,136,137,216,217,317,337,
TCI series: IADC CODE:415,435,445,515,525,535,545,615,625,635,645,735,835.
1.Sizes rang from 3 7/8" to 26"
2.Covers almost all IADC code.
3.Reliable quality and reasonable price
Normal IADC
435 Soft Formation TCI Tricone Bits:
The 435 TCI bits are used to drill low compressive strength, very soft formations. TCI bits maximize the use of both conical and chisel tungsten carbide inserts of large diameters and high projection. This cutting structure design, combined with maximum cone offset, results in high bit penetration rates. The deep intermesh of cutter rows prevents bit bailing in sticky formations.
515 Medium Formation TCI Tricone Bits:
The 515 features aggressive chisel tungsten carbide inserts on the heel rows and inner rows. This design provides a fast drilling rate and added cutting structure durability in medium-to-medium hard formation. The HSN rubber O-ring provides adequate sealing for bearing durability.
635 Hard Formation TCI Tricone Bits:
The 635 bits can be used to drill hard and abrasive formation. Wear-resistant tungsten carbide inserts are used in the outer rows to prevent loss of bit gauge. Maximum numbers of hemispherical-shaped inserts are used in all rows to provide cutter durability and long life.
615 Medium-Hard Formation TCI Tricone Bits:
The 615 features robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added cutting structure durability in medium to medium hard formations. The HSN rubber O-ring provides adequate sealing for bearing durability.
Detailed Photos
TCI TYPE - TCI short for Tungsten Carbide Insert
Company View