Permanent Concentric Overburden Casing System
Sollroc Concentric Overburden Casing System can be used to install casings in many different types of overburdens, and in all types of natural formations. The Concentric Overburden Casing System drills straight holes and penetrates boulders easily. The system is designed for use with permanent casings, which are welded together progressively during drilling and left in the hole. It can be used to drill and case comparatively deep holes, depending on the application, hole inclination, and ground conditions.
Casing Tube OD(mm) | Casing Tube ID(mm) | Reamed Dia(mm) | Casing Shoe ID(mm) | Polit bit Dia(mm) | Hammer Type |
108 | 93-99 | 118 | 86 | 77 | DHD3.5/QL30 |
114 | 102-104 | 127 | 91 | 82 | DHD3.5/QL30 |
127 | 115-117 | 136 | 101 | 92 | DHD3.5/QL30 |
140 | 124-128 | 152 | 117 | 105 | DHD340/SD4/QL40/M40 |
146 | 130-134 | 154 | 117 | 105 | DHD340/SD4/QL40/M40 |
168 | 148-156 | 185 | 140 | 125 | DHD350/SD5/QL50/M50 |
178 | 158-166 | 195 | 150 | 140 | DHD350/SD5/QL50/M50 |
183 | 163-171 | 193 | 154 | 144 | DHD350/SD5/QL50/M50 |
194 | 174-182 | 211 | 166 | 150 | DHD360/SD6/QL60/M60 |
219 | 199-207 | 237 | 193 | 165 | DHD360/SD6/QL60/M60 |
245 | 225-233 | 260 | 210 | 190 | DHD380/SD8/QL80/M80 |
273 | 253-257 | 308 | 241 | 220 | DHD380/SD8/QL80/M80 |
325 | 305-309 | 348 | 281 | 205 | SD10/NUMA100 |
406 | 382-388 | 440 | 364 | 340 | SD10/NUMA100 |
We can also provide related products DTH hammers, ODEX system, symmetrix systems, slide block drilling systems, etc and DTH drilling pipes for various thread API REG, API IF, BECO, etc
By sea, By air or By Express
Packaging
We can also provide related products DTH button bits, ODEX, symmetric overburden systems, slide block drilling systems, etc and DTH drilling pipes for various thread API REG, API IF, BECO, etc
DTH hammers >> DTH bits >> RC hammers >>
RC bits >> Button bits >> ODEX system >>