Español
Русский
Thread Button drill Bit
Thread button drill bits are made by high quality alloy steel bar and tungsten carbides. Through heat treatment, our drilling tools are tough enough to meet rock drilling demands and have the least loss of energy while drilling the rocks. Besides, we can design customized thread button drill bits according to different drilling application, and custom drill bits are applicable to drill soft rock, loose-medium rock and hard rock.
A: Drifting and Tunneling
thread: R25, R28, R32
diameter: 33mm-76mm
B: Bench Drilling
thread: R3212, R32, HL38, T38, T45, T51, T60
diameter: 48mm-152mm
C: Tube Drilling
thread: ST58, ST68
diameter: 89mm-152mm
OEM and ODM--- We can design and manufacture according to customers's samples or drawings of the Bit Dia., No. Of air/water holes, carbide button shape and the face shape.
Super Quality--- Our button bit is made with high quality of best quality alloy steel bar and tungsten carbides, through heat treatment so that it can withstand the toughest rock drilling demands, and transmit intensive impact energy into the rock with the least possible loss of energy.
Global Reputation--- The drill button bit is widely used in metallurgy mine, geological exploration, water conservancy construction, electricity, traffic, tunnel, quarry, national defence stone project etc. Our clients
Are all over the world, like Germany, Spain, Italy, Russia, Japan, India, Australia, Mexico, Colombia, Brazil,
Chile, South Africa...etc. We have very good reputation worldwide!
R25\R32 Thread Drill Bit
| Bit Dia | Tip size(mm) | No.of flushing holes | Weight | ||
| mm | (kg) | ||||
| Gauge | Front | Side | Front | ||
| 41 | 5*8 | 2*7 | 1 | 1 | 0.54 |
| 43 | 5*8 | 2*7 | 1 | 1 | 0.55 |
| 45 | 5*9 | 2*8 | 1 | 1 | 0.6 |
| 41 | 5*8 | 2*7 | 1 | 1 | 0.5 |
| 43 | 5*8 | 2*7 | 1 | 1 | 0.6 |
| 45 | 5*9 | 2*8 | 1 | 2 | 0.8 |
| 48 | 5*9 | 2*8 | 1 | 2 | 0.9 |
| 51 | 5*10 | 2*10 | 1 | 2 | 1.1 |
| 60 | 6*9 | 3*9 | 0 | 3 | 1.8 |
| 64 | 6*10 | 4*9 | 0 | 3 | 2 |
| 70 | 6*12 | 4*10 | 0 | 3 | 2.3 |
| 76 | 6*13 | 4*10 | 0 | 3 | 2.5 |
| 89 | 8*12 | 5*12 | 2 | 2 | 3 |
| 102 | 8*13 | 6*12 | 2 | 2 | 4 |
| 115 | 8*13 | 6*13 | 2 | 2 | 6 |
| 60 | 6*9 | 4*8 | 0 | 3 | 1.7 |
| 64 | 6*9 | 4*9 | 0 | 3 | 1.9 |
| 70 | 6*10 | 4*10 | 0 | 3 | 2.2 |
| 76 | 8*11 | 6*9 | 0 | 4 | 3.1 |
| 89 | 8*12 | 6*11 | 0 | 4 | 5 |
| 102 | 8*13 | 6*12 | 0 | 4 | 7 |
| 115 | 8*13 | 6*13 | 0 | 4 | 9.6 |
T38 Thread Drill Bit
| Bit Dia | Tip size(mm) | No. of flushing holes | Weight | ||
| mm | (kg) | ||||
| Gauge | Front | Side | Front | ||
| 57 | 5*11 | 3*10 | 1 | 1 | 1.6 |
| 64 | 5*12 | 3*11 | 1 | 1 | 1.6 |
| 76 | 5*14 | 3*12 | 1 | 2 | 2.4 |
| 64 | 8*9 | 4*9 | 2 | 2 | 1.8 |
| 76 | 8*11 | 4*10 | 2 | 2 | 2.6 |
| 8*12 | 6*11 | 2 | 2 | 3.3 | |
| 102 | 8*13 | 6*12 | 2 | 2 | 4.7 |
| 64 | 6*10 | 4*9 | 0 | 3 | 1.7 |
| 70 | 6*11 | 4*10 | 0 | 3 | 2.2 |
| 89 | 6*14 | 4*12 | 0 | 3 | 4.3 |
| 64 | 8*9 | 5*8 | 0 | 4 | 1.7 |
| 70 | 8*10 | 5*9 | 0 | 4 | 2.2 |
| 76 | 8*11 | 5*10 | 0 | 4 | 2.7 |
| 89 | 8*12 | 6*11 | 0 | 4 | 3.3 |
| 102 | 8*13 | 6*12 | 0 | 4 | 4.7 |
| 60 | 8*9 | 3*9 | 2 | 2 | 1.7 |
| 64 | 8*9 | 4*9 | 2 | 2 | 2 |
| 70 | 8*10 | 4*10 | 2 | 2 | 2.4 |
| 76 | 8*11 | 4*10 | 2 | 2 | 3.2 |
| 89 | 8*12 | 5*12 | 2 | 2 | 5.8 |
| 64 | 8*9 | 5*9 | 0 | 4 | 1.9 |
| 70 | 8*10 | 5*10 | 0 | 4 | 2.4 |
| 76 | 8*11 | 5*10 | 0 | 4 | 3.3 |
| 89 | 8*12 | 6*11 | 0 | 4 | 5.3 |
R38 Thread Bit
| Bit Dia | Tip size(mm) | No. of flushing holes | Weight | ||
| mm | (kg) | ||||
| Gauge | Front | Side | Front | ||
| 57 | 5*11 | 3*10 | 1 | 1 | 1.6 |
| 64 | 5*12 | 3*11 | 1 | 1 | 1.6 |
| 76 | 5*14 | 3*12 | 1 | 2 | 2.4 |
| 64 | 8*9 | 4*9 | 2 | 2 | 1.8 |
| 76 | 8*11 | 4*10 | 2 | 2 | 2.6 |
| 89 | 8*12 | 6*11 | 2 | 2 | 3.3 |
| 102 | 8*13 | 6*12 | 2 | 2 | 4.7 |
| 64 | 6*10 | 4*9 | 0 | 3 | 1.7 |
| 70 | 6*11 | 4*10 | 0 | 3 | 2.2 |
| 89 | 6*14 | 4*12 | 0 | 3 | 4.3 |
| 64 | 8*9 | 5*8 | 0 | 4 | 1.7 |
| 70 | 8*10 | 5*9 | 0 | 4 | 2.2 |
| 76 | 8*11 | 5*10 | 0 | 4 | 2.7 |
| 89 | 8*12 | 6*11 | 0 | 4 | 3.3 |
| 102 | 8*13 | 6*12 | 0 | 4 | 4.7 |
| 60 | 8*9 | 3*9 | 2 | 2 | 1.7 |
| 64 | 8*9 | 4*9 | 2 | 2 | 2 |
| 70 | 8*10 | 4*10 | 2 | 2 | 2.4 |
| 76 | 8*11 | 4*10 | 2 | 2 | 3.2 |
| 89 | 8*12 | 5*12 | 2 | 2 | 5.8 |
| 64 | 8*9 | 5*9 | 0 | 4 | 1.9 |
| 70 | 8*10 | 5*10 | 0 | 4 | 2.4 |
| 76 | 8*11 | 5*10 | 0 | 4 | 3.3 |
| 89 | 8*12 | 6*11 | 0 | 4 | 5.3 |
T45 Thread Drill Bit
| Bit Dia | Tip size(mm) | No. of flushing holes | Weight | ||
| mm | (kg) | ||||
| Gauge | Front | Side | Front | ||
| 70 | 6*11 | 4*10 | 0 | 2 | 2.4 |
| 76 | 6*13 | 4*10 | 0 | 2 | 2.6 |
| 89 | 8*12 | 5*12 | 2 | 2 | 4.5 |
| 102 | 8*13 | 6*12 | 2 | 2 | 5 |
| 115 | 8*14 | 6*13 | 2 | 2 | 6.8 |
| 64 | 6*10 | 4*9 | 0 | 3 | 1.6 |
| 70 | 6*12 | 4*10 | 0 | 3 | 2.4 |
| 76 | 8*10 | 5*10 | 0 | 4 | 2.6 |
| 89 | 8*12 | 6*11 | 0 | 4 | 4.6 |
| 102 | 8*13 | 6*12 | 0 | 4 | 4.5 |
| 70 | 8*11 | 4*10 | 2 | 2 | 2.5 |
| 76 | 8*11 | 4*10 | 2 | 2 | 3.1 |
| 80 | 8*12 | 5*11 | 2 | 2 | 4 |
| 89 | 8*12 | 6*11 | 2 | 2 | 5.1 |
| 102 | 8*13 | 6*12 | 2 | 2 | 8.2 |
| 70 | 8*10 | 5*9 | 0 | 4 | 2.2 |
| 76 | 8*11 | 6*9 | 0 | 4 | 3.1 |
| 89 | 8*12 | 6*11 | 0 | 4 | 5.4 |
| 102 | 8*13 | 6*12 | 0 | 4 | 7.8 |
| 115 | 8*13 | 6*12 | 0 | 4 | 8.3 |
T51 Thread Drill Bit
| Bit Dia | Tip size(mm) | No. of flushing holes | Weight | ||
| mm | (kg) | ||||
| Gauge | Front | Side | Front | ||
| 89 | 8*12 | 5*12 | 2 | 2 | 4.9 |
| 102 | 8*13 | 6*12 | 2 | 2 | 5.8 |
| 115 | 8*14 | 6*13 | 2 | 2 | 6.8 |
| 127 | 8*14 | 6*14 | 2 | 2 | 7.5 |
| 89 | 9*10 | 6*11 | 0 | 3 | 4.6 |
| 102 | 9*12 | 6*12 | 0 | 3 | 5.9 |
| 115 | 9*12 | 9*12 | 0 | 3 | 6.6 |
| 127 | 9*13 | 9*13 | 0 | 3 | 8.4 |
| 152 | 9*14 | 9*14 | 0 | 3 | 11.1 |
| 89 | 6*14 | 4*12 | 0 | 3 | 4.5 |
| 102 | 8*13 | 6*12 | 0 | 4 | 5.7 |
| 115 | 8*13 | 6*13 | 0 | 4 | 6.8 |
| 127 | 8*14 | 7*13 | 0 | 4 | 7.5 |
| 140 | 8*16 | 6*16 | 0 | 4 | 14.4 |
| 152 | 8*16 | 7*16 | 0 | 4 | 15.1 |
| 89 | 8*12 | 5*12 | 2 | 2 | 5.1 |
| 102 | 8*13 | 6*12 | 2 | 2 | 7.1 |
| 115 | 8*14 | 6*13 | 2 | 2 | 10.5 |
| 127 | 8*14 | 6*14 | 2 | 2 | 12.5 |
| 89 | 8*12 | 6*11 | 0 | 4 | 5.3 |
| 102 | 8*13 | 6*12 | 0 | 4 | 7.4 |
| 115 | 8*13 | 6*13 | 0 | 4 | 10.2 |
| 127 | 8*14 | 7*13 | 0 | 4 | 12 |
ST58 Thread Drill Bit
| Bit Dia | Tip size(mm) | No.of flushing holes | Weight | ||
| mm | (kg) | ||||
| Gauge | Front | Side | Front | ||
| 89 | 8*12 | 5*12 | - | 2 | 4.8 |
| 102 | 8*13 | 6*12 | - | 2 | 6.5 |
| 115 | 8*13 | 6*13 | - | 2 | 6.8 |
| 127 | 8*14 | 7*14 | - | 2 | 8.5 |
| 89 | 8*12 | 6*11 | - | 2 | 4.6 |
| 102 | 8*13 | 6*12 | - | 2 | 6 |
| 115 | 8*13 | 6*13 | - | 2 | 6.4 |
| 127 | 8*14 | 7*14 | - | 2 | 8.2 |
| 89 | 8*12 | 5*12 | - | 2 | 4.9 |
| 102 | 8*13 | 6*12 | - | 2 | 6.4 |
| 115 | 8*13 | 6*13 | - | 2 | 6.7 |
| 127 | 8*14 | 7*14 | - | 2 | 8.8 |
| 89 | 8*12 | 6*11 | - | 2 | 4.7 |
| 102 | 8*13 | 6*12 | - | 2 | 6.2 |
| 115 | 8*13 | 6*13 | - | 2 | 6.4 |
| 127 | 8*14 | 7*14 | - | 2 | 8.3 |
| 89 | 8*12 | 5*12 | - | 2 | 5 |
| 102 | 8*13 | 6*12 | - | 2 | 6.9 |
| 115 | 8*13 | 6*13 | - | 2 | 7.2 |
| 127 | 8*14 | 7*14 | - | 2 | 8.9 |
| 89 | 8*12 | 6*12 | - | 2 | 4.8 |
| 102 | 8*13 | 6*12 | - | 2 | 6.6 |
| 115 | 8*13 | 6*13 | - | 2 | 7 |
| 127 | 8*14 | 7*14 | - | 2 | 8.7 |
GT60 Thread Drill Bit
| Bit Dia | Tip size(mm) | No. of flushing holes | Weight | ||
| mm | (kg) | ||||
| Gauge | Front | Side | Front | ||
| 102 | 8*13 | 6*12 | - | 2 | 8.2 |
| 115 | 8*13 | 6*13 | - | 2 | 10.1 |
| 127 | 8*14 | 7*14 | - | 2 | 11.3 |
| 152 | 8*18 | 8*16 | - | 2 | 15.9 |
| 102 | 8*13 | 6*12 | - | 2 | 8.1 |
| 115 | 8*13 | 6*13 | - | 2 | 10 |
| 127 | 8*14 | 7*14 | - | 2 | 11.2 |
| 152 | 8*18 | 8*16 | - | 2 | 15.8 |
| 102 | 8*13 | 6*12 | - | 2 | 8.5 |
| 115 | 8*13 | 6*13 | - | 2 | 10.4 |
| 127 | 8*14 | 7*14 | - | 2 | 11.6 |
| 152 | 8*18 | 8*16 | - | 2 | 15.9 |
| 102 | 8*13 | 6*12 | - | 2 | 8.7 |
| 115 | 8*13 | 6*13 | - | 2 | 10.6 |
| 127 | 8*14 | 7*14 | - | 2 | 11.8 |
| 152 | 8*18 | 8*16 | - | 2 | 16.2 |
| 102 | 8*13 | 6*12 | - | 2 | 8.8 |
| 115 | 8*13 | 6*13 | - | 2 | 10.9 |
| 127 | 8*14 | 7*14 | - | 2 | 11.7 |
| 152 | 8*18 | 8*16 | - | 2 | 16.6 |
| 102 | 8*13 | 6*12 | - | 2 | 8.7 |
| 115 | 8*13 | 6*13 | - | 2 | 10.6 |
| 127 | 8*14 | 7*14 | - | 2 | 11.6 |
| 152 | 8*18 | 8*16 | - | 2 | 16.4 |
ST68 Thread Drill Bit
| Bit Dia | Tip size(mm) | No. of flushing holes | Weight | ||
| mm | (kg) | ||||
| Gauge | Front | Side | Front | ||
| 115 | 8*13 | 6*13 | - | 2 | 9.7 |
| 127 | 8*14 | 7*14 | - | 2 | 10.2 |
| 140 | 8*16 | 8*14 | - | 2 | 12 |
| 152 | 8*18 | 8*16 | - | 2 | 16 |
| 115 | 8*13 | 6*13 | - | 2 | 9.5 |
| 127 | 8*14 | 7*14 | - | 2 | 10 |
| 140 | 8*16 | 8*14 | - | 2 | 12 |
| 152 | 8*18 | 8*16 | - | 2 | 16 |
| 115 | 8*13 | 6*13 | - | 2 | 9.8 |
| 127 | 8*14 | 7*14 | - | 2 | 10.3 |
| 140 | 8*16 | 8*14 | - | 2 | 12.2 |
| 152 | 8*18 | 8*16 | - | 2 | 16.2 |
| 115 | 8*13 | 6*13 | - | 2 | 9.7 |
| 127 | 8*14 | 7*14 | - | 2 | 10.2 |
| 140 | 8*16 | 8*14 | - | 2 | 12.1 |
| 152 | 8*18 | 8*16 | - | 2 | 16.1 |
| 115 | 8*13 | 6*13 | - | 2 | 9.9 |
| 127 | 8*14 | 7*14 | - | 2 | 10.6 |
| 140 | 8*16 | 8*14 | - | 2 | 12.5 |
| 152 | 8*18 | 8*16 | - | 2 | 16.8 |
| 115 | 8*13 | 6*13 | - | 2 | 9.8 |
| 127 | 8*14 | 7*14 | - | 2 | 10.4 |
| 140 | 8*16 | 8*14 | - | 2 | 12.3 |
| 152 | 8*18 | 8*16 | - | 2 | 16.6 |
All Items will be packed by PLYWOOD BOX for bulk order, or by Carton for small quantities.
Shipping Methods we will suggest BY SEA for more than 1CBM and BY AIR for less than 200kgs.
One piece for sample is available.
About Us:
1. Our factory has been specialized in manufacturing drilling tools and spare parts since 1980.
2. We have advanced technology and equipment.
3. Our technician has more than 36 year’s professional working experience.
4. Rock drilling tools are exported throughout the world. Main market: Brazil, Chile, Colombia, Uruguay, Australia,Ukraine,Russia, ,Norway, Turkey, USA,Canada, Iran, Malaysia, Thailand, India, etc.
We have two main business field:
1) Rock drill tools for quarrying and mining: www.quarryingtools
2) Natural Stone Processing/Cutting/Splitting machines: www.split-stone
Our products range:
A. Rock drill tools, including small hole,drifting,bench and products drilling, down-the-hole drilling;
B.Chisel bits, button bits regrinding system.
C.Non-explosive demolition, cracking agent.
D.Natrual face stone processing system, including hydraulic splitting machine, stamping machine, mosaic stone making machine,decoractive stone breaking machine...
The information you may like to know before order:
1. Methods of Payment:
T/T (Telegraphic Transfer) or Western Union or L/C at sight,onetouch.cn,Escrow,Paypal
2. Handling time for an order
Based on order quantity, normally it takes 25 days for production.
Only 2 or 3 days if we have stock on your request size.
3. Shipping way
Sample order: we suggest Courier express like DHL/UPS/TNT/FEDEX or by air
Bulk order: we suggest by air or by sea.
4. Quality Control
We have our own experienced QC.
There will be strict inspection and testing for every order before shipping out.
5. After Services:
1. Our sales team will response for your question within 24 hours (Holidays Excluded)
2. Technical Support will be available in any time
3. Free replacement will provide once the failure confirmed caused by our product quality
In order to quote you the best price, please tell us the details as following:
01.Grade and specification or drawings;
02.Quantity and quality level;
03.Operation environment;
04.Other special requirement.
| Port: | Xiamen Shenzhen Tianjin Ningbo Qingdao Shanghai |
| Payment Terms: | L/C,T/T,Western Union,MoneyGram |
| Supply Ability: | 20000 Piece/Pieces per Month |
| Usage: | for drifting tunneling bench drilling |
| Processing Type: | Forging |
| Place of Origin: | Fujian China,Fujian, China (Mainland) |
| Machine Type: | Drilling Tool |
| Use: | Ore Mining |
| HS CODE: | 82071990 |
| Material: | Carbide |
| Model Number: | R22 R25 R32 T38 T45 T51 ST58 ST68 thread button bit |
| Certification: | ISO2000 |
| Brand Name: | BESTLINK |
| carbide shape: | spherical, ballistic |
| skirt body: | standard, retrac |
| Type: | DRILL BIT |
| diameter: | 33-152mm |
| bit face: | FF, DC, Concave, Convex |
| Mining Object: | granite, marble, sandstone,limestone |
| Packaging Detail: | PLYWOOD box or Carton |
